Waywe 3.8Inch Side Marker Light 10PCS 6LED Blue Trailer Camper Clearance Marine Boat Navigation Port Starboard Indicator Lights for 12V DC Kayak Sailboat Yacht Truck RV

About this item

• Upgrade Lighting: Each 3.8 inch marker light includes 6pcs of 2835 SMD LEDs with high brightness and quality. Stable output of 120LM of light, increase the safety of nighttime driving
• 10 Minute Installation: each light is equipped with a foam pad and the required bolts and nuts. The first step is to mark the installation hole position with a foam pad, and the second step is to stick the foam pad to the back of the light, pass the line through the reserved hole position, and lock both sides with studs and nuts. Finally, connect the wires, blue positive and black negative
• Sealed & Waterproof Design: This marker light adopts a glue sealed design, and the edges of the lens and base are tightly bonded through glue. At the outlet of the back, black hard glue has also been added to comprehensively prevent water ingress. The waterproof level reaches IP67
• Widely application: Fit for most 12V Yacht, Kayak, Sailboat, Pontoon, Truck, Trailer, Bus, RV etc. And Excellent lighting and high waterproof performance make this light perfect for working as led indicator light, boat light, front side rear marker light, rock light and night lighting
• Package Include: 10pcs blue marker light, hardware pack and foam pad. 2 Years Warranty Honored by Waywe

Tail light series adopts high-brightness and low-energy LEDs, presenting a bright light effect. Provides excellent and long-lasting products.

• Lumen: 120LM per light
• Working Voltage: 12V DC
• Light Dimension: 3. 7” x 0. 7” x 0. 1”
• LED Quantity & Type: 6PCS Blue 2835 SMD LEDs

Key Features

IP67 Waterproof

Whether it is at the edges of the lens and base or at the outlet of the back, glue is added to enhance waterproof performance, ensuring that the light can work normally in all weather and environments.

Product Display

PC Lens

The cover is made of PC material with impact resistance, combined with a convex lens design to present better lighting effects.

ABS Base

The black ABS base is hard, heat-resistant, and impact resistant, which can effectively protect the accessories inside the light.

Sealed Design

Adding glue to the back is only for better sealing and will not affect the flush mounting of the light.

Wire Connection

Two wires: black for negative and blue for positive.

Installation Steps

Step 1

Mark and drill the three mounting holes with the provided foam pad.

Step 2

Peel and stick the foam pad to the light.

Step 3

Pass the wires through the middle hole, and fix the two sides of light with bolts and nuts.

Step 4

Connect black wire to negative, and red/green wire to positive. Then power on.

Work Perfectly on 12V Truck, Trailer, Pickup, Dump, RV